Two-Layer Porsche GT4 RS Clubsport Wrap in Knoxville: 3M 2080 Dragon Fire Red Under a Printed Clear Livery

Porsche GT4 RS Clubsport two-layer race car wrap 3M 2080 Dragon Fire Red Knoxville TN

This Porsche 718 GT4 RS Clubsport came back to our Knoxville shop for its second race car wrap, and the brief was simple: more depth, more gloss. Instead of a single printed film, we built this livery in two layers. A metallic red color change film goes down first, then a printed clear film carries the black fade and checker pattern over it. Here is how that system works and why it looks the way it does.

Round Two on the Rezoom Motorsports #88

We wrapped this car once before. The first GT4 RS Clubsport livery was printed on 3M IJ175cv3 and finished in satin. It did its job on track, and the owner trusted us with the next version. This time the goal was a red that looks wet in the sun and a black that melts into it, without losing the metallic sparkle that printed film alone cannot reproduce.

How the Two-Layer Porsche GT4 RS Wrap Works

Layer one is the color. The whole car starts in 3M 2080 Gloss Dragon Fire Red, a metallic color change film. Real metallic flake gives the red its depth and the shifting highlights you see across the hood and front fenders.

Layer two is the livery. The red to black fade, the checker break-up, the Rezoom Motorsports script and the 88s are printed on clear 3M film. Wherever the print is transparent, the metallic red underneath shows straight through. Wherever the print turns solid, it builds into a deep black down the doors, quarters and rear bumper.

The top coat is gloss. The printed clear film is protected with 3M 8518 gloss overlaminate. It shields the ink from UV and track debris and adds a second layer of shine on top of the gloss base film.

A single printed vinyl wrap can fake a metallic look with ink, but it cannot hold real flake. Stacking a metallic film under a printed clear layer is how you get both a custom graphic and a true metallic finish on the same panel.

What the Installation Takes

Two layers means every panel gets installed twice, and the second layer has to land exactly on the first. The checker fade has to line up across the door gap, the quarter panel and the rear bumper, so the printed film is panelled and placed to the car, not just to a flat template. The GT4 RS also has some of the hardest shapes in the paddock: the NACA ducts on the hood, the deep side intakes, the vented front fenders and a wide aero bumper. Each one gets the base film tucked and post-heated before the printed clear layer goes over it, so the edges stay down at speed and through heat cycles.

A Porsche GT4 RS Clubsport Wrap With Real Depth

The finished car reads as one piece of paint from ten feet away. Up close, the metallic red glows under the clear print and the black fade has a depth you only get with layers. The owner was thrilled with it, and it is the second time this car has rolled out of our bay wearing our work. If you are weighing options for your own build, our Porsche GT4 Clubsport wrap guide covers cost, colors and what to expect.

Why Racers Bring Their Cars to AZ Rag

AZ Rag is Knoxville’s only 3M Certified wrap shop. We print, laminate and install in the same building on Henson Road, which is what makes a layered system like this possible: the print, the base film and the install crew are all under one roof and all working to the same car. This owner came back for a second livery because the first one held up to track days and still looked right in the paddock photos.

Planning a livery or a color change for your race car? Tell us the car and the look you want, and get a free race car wrap quote. A real person replies within one business day.

Our Family of Brands

Shopping Cart
Start the Process
Start the Process
Scroll to Top